العربات المقطورة شاحنة نقل الحاويات Fliegl Tandem Wechselanhänger TWP 180 Mega-EL




















إذا قررت شراء المعدات بسعر منخفض، فتأكد أنك تتواصل مع البائع الحقيقي. اكتشف أكبر قدر ممكن من المعلومات عن مالك المعدات. تتمثل إحدى طرق الغش في تقديم نفسك كشركة حقيقية. إن ساورك شك، أخبرنا عن ذلك من أجل تشديد الرقابة وذلك من خلال نموذج التعليقات.
قبل أن تقرر القيام بالشراء، احرص على مراجعة العديد من عروض البيع بعناية لفهم متوسط تكلفة المعدات التي اخترتها. إذا كان سعر العرض الذي أعجبك أقل بكثير من عروض مشابهة، ففكر في الأمر بتأنٍ. قد يكون هناك فرق أسعار هائل يشير إلى عيوب مخفية أو أن البائع يحاول ارتكاب أعمال احتيالية.
ابتعد عن شراء المنتجات التي يكون سعرها مختلف بشدة عن متوسط السعر لمعدات مشابهة.
لا توافق على الوعود المثيرة للشكوك والبضائع المدفوعة مسبقًا. إن ساورك شك، فلا تخاف من طلب توضيح التفاصيل وأن تطلب صورًا ومستندات إضافية للمعدات وأن تفحص صحة التصديق على تلك المستندات وتطرح الأسئلة التي تساورك.
أكثر أنواع الاحتيال شيوعًا، قد يطلب البائعون غير المنصفون مبلغًا معينًا كعربون مسبق "لتحجز" حقك في شراء المعدات. وبالتالي يستطيع المحتالون تجميع مبلغًا ضخمًا ثم يختفون ولا تستطيع التواصل معهم بعد ذلك.
- إرسال الدفعة المسبقة إلى البطاقة
- لا تقم بالدفع المسبق بدون مستندات ورقية تؤكد عملية تحويل الأمول إذا ساورك أي شك في البائع خلال التواصل.
- إرسال إلى حساب "الوصي" “Trustee”
- هذا الطلب ينبغي أن يكون بمثابه إنذار فأنت على الأرجح تتواصل مع شخص محتال.
- إرسال إلى حساب الشركة باسم مشابه
- توخّ الحذر، فقد يختفي المحتالون أنفسهم أيضًا خلف شركات معلومة أو يدخلون تغييرات طفيفة على الاسم. لا تحول الأموال إذا ساورك شك في اسم الشركة.
- استبدال البيانات الخاصة في فاتورة شركة حقيقية
- قبل التحويل، تأكد أن البيانات المحددة صحيحة وأنها ترتبط أو لا ترتبط بالشركة المحددة.




















Location: Oberpöllnitzer Straße 8, 07819 Triptis, Deutschland
Please note: the images shown are archive photos
Payload approx: 14800 kg
Bogie load: 18000 kg
Nose weight: 1000 kg
Unladen weight (base version) approx. only: 3200 kg +/- production tolerance
Overall length with 7820 mm swap body approx: 10020 mm
Overall width max: 2550 mm
Frame height lowered approx: 1010 mm
Frame height raised approx: 1390 mm
Frame height in travel position approx: 1070 mm
Parking height approx: 1040 to 1320 mm
Standard stop to front locking device approx: 985 mm
Locking distance: 5853 mm
Coupling height approx: 380 mm
Drawbar length set from 7820 mm swap body stop approx: 2200 mm
4 twist locks with sturdy brackets on a 20" base, for 7.45 m and 7.82 m swap bodies (note: combined with the underrun protection, this protrudes on a 7.15 m swap body)
Coupling height: 380 mm
Warning: this trailer must only be towed by towing vehicles that guarantee the effectiveness of the ABS!
axle configuration: 2 axles
Swap-Body Trailer
#Weights and Dimensions
Parking heights apply on level ground
The towing vehicle must have a similar lift range to the trailer
otherwise the unit will stand at an angle
#Chassis - Swap-Body Centre-Axle Trailer
Fine-grain steel welded construction
Front stop
longitudinally adjustable and foldable
2 pairs of removable guide rollers
front and rear
1 pair of geared landing legs front
with straight foot and single-side operation on the RHS (direction of travel)
1 pair of geared landing legs rear
with straight foot and single-side operation on the RHS (direction of travel)
2 wheel chocks with holder
Aluminium side impact protection
Steel rear underrun protection
Full-width rear mudflaps (not in combination with forklift pockets)
Half-shell mudguards
Mudflaps
#Coupling Gear - Centre-Axle Trailer
Drawbar with certified 50 mm tow eye
haulage-specification version
Low-mounted drawbar coupling
2200 mm
#Axles and Suspension
SAF disc brake axles
Bjtxw A Tozu I D Rj Redg
Axles/chassis laser-aligned - reduces tyre wear and fuel consumption
#Braking System
2-line air braking system
Colour-coded pipework for easy servicing
Air reservoir capacity 208 litres
Spring-loaded parking brake
2 anti-mismatch coupling heads at the front
with connecting lines to the towing vehicle
connection on the RHS
24-volt EBS electronic braking system with EBS connector at the front
with connecting cable
connection on the RHS
With lift-and-lower valve
hold function in both lowered and raised positions
#Wheels and Tyres
445/45 R19.5" make of manufacturer's choice
Steel rims
factory silver
#Electrics
24-volt multi-chamber lights
yellow LED marker lights at the sides
2 white front position lights
2 white/red rear tail lights
2 x 7-pin anti-mismatch connectors at the front
with connecting cable
connection on the RHS
LED work lights on both sides (switched via reversing light)
2 additional LED work lights at the rear
switched via reversing light
1 LED work light at the front
centred between the beams
facing rearward
switched via reversing light
#Country of Registration / Plates
Germany
With Dekra inspection and certificate (in accordance with §13 EC-FGV)
24/7 service hotline
Prepared for single-line number plate holder
Contour marking with reflective tape to ECE R 048
white at the sides and red at the rear