شاحنة جمع ونقل النفايات IVECO EUROCARGO

IVECO EUROCARGO – Technical Specification
Operating Conditions

Ambient operating temperature range: from −25°C to +40°C.

Year of manufacture: 2023.

GVW 18 tonnes, chassis adapted for dust-free superstructure installation.

Drive configuration: 4x2 – first axle steering, second axle driving.

Wheelbase: 4,185 mm.

Suspension

Front axle: parabolic springs, technical capacity 7,100 kg.

Rear axle: pneumatic suspension, technical capacity 12,000 kg.

Engine & Driveline

Emission standard: EURO 6.

Engine displacement: 6,700 cm³.

Compression-ignition diesel engine, power output 280 HP.

12-speed automated transmission.

Tyres: 315/80 R22.5 with regional tread pattern.

Cab Equipment

Tilting roof ventilator.

Rubber floor mats.

Central locking system.

Driver’s cab air conditioning.

Document storage compartment inside the cab.

Cruise control.

12V and 24V sockets on the dashboard.

Electronic Stability Program (ESP).

ASR package (Anti-Slip Regulation).

Anti-lock Braking System (ABS).

Remote control suspension height adjustment.

Two batteries, each 170 Ah.

Main power switch.

200-liter diesel fuel tank (plastic).

30-liter AdBlue tank (plastic).

Front towing hook.

Spare wheel.

10-ton jack, wheel wrench, warning triangle, fire extinguisher, first aid kit.

High-position air intake (side-mounted or above cab).

Heated fuel filter.

Lane departure warning system.

Left-hand drive.

Pneumatic driver’s seat.

Two-passenger bench seat.

Menu language: Polish.

Forward collision warning system with emergency braking.

Electrically operated windows (left and right door).

Audible reverse warning signal.

Electrically operated, heated rear-view mirrors; heated ramp mirror and kerb mirror.

Front ramp mirror.

LED daytime running lights.

Radio receiver installed in the cab.

Digital tachograph.

PTO (power take-off) from the gearbox.

**Superstructure

ZENIT 18 – Technical Specification**

Year of manufacture: 2023.

Box-type rear-loading superstructure with oval cross-section; flat floor with rounded wall transitions; smooth, rib-free construction.

Body container capacity: 18 m³.

Body container with inspection door on the side wall.

Hopper capacity: 2.3 m³.

Tailgate (hopper/lower body section) made of wear-resistant steel, sheet thickness 5 mm.

Hopper trough made of wear-resistant steel, sheet thickness 10 mm.

Ejector plate guides mounted on the side walls of the superstructure.

Compaction ratio: 1:6.

Lifting device compatible with bins 120–1100 L (metal and plastic).

Hopper integrated with the tailgate.

Hopper sandblasted and painted.

Container lifting, emptying, and returning performed without increasing engine RPM.

Control System

Control box located on the right side of the hopper, featuring:
• hopper control,
• compactor start,
• audible warning signal,
• emergency stop switch,
• permanent symbol markings on buttons.

Proportional hydraulic control of the loading device.

Two compaction cylinders mounted inside the tailgate.

Tailgate opening cylinders mounted on the sides.

System for releasing jammed objects.

Drain connection with discharge valve in the loading hopper trough.

Rear-view camera with microphone, monitor and speaker installed in the cab.

Two emergency stop switches.

Controller enabling automatic loading cycle and single cycle.

Manual control available.

Ejector plate extension and retraction controlled from a cab-mounted console.

Ability to read, via the recording device, the number of:
• compaction cycles,
• tailgate lifting and lowering cycles,
• hydraulic pump operating hours (for supervisory personnel).

Drive & Construction

Superstructure powered by PTO from the gearbox.

Superstructure constructed from high-strength, wear- and corrosion-resistant steel; double-primed and painted.

Lighting & Safety

Lighting compliant with applicable regulations.

Two warning lights.

Rear-mounted warning beacon (“flasher”).

Additional working lights installed under the superstructure, controlled from the cab.

Two loader footrests enabling manual waste loading.

CE marking; body container and hopper parameters compliant with EN 1501-1 with later amendments.

Central lubrication system.

Side working spotlight mounted in the tailgate.

Wheel mudguards with splash flaps.

Leachate tank.

Number plate installed in the lower position in accordance with regulations.

Vehicle color: white.